Menu

Support

FAQS

e-MTB

What type of maintenance or reviews do drive units require?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

What do Mondraker e-MTBs offer?

e-Prime, e-Vantage, e-Crafty and e-Panzer are the electric bike models on Mondraker’s 2017 range. Aboard them, you will discover a new dimension to enjoy mountain biking without limits, on an all-terrain bike concept featuring the best latest-generation technologies currently offered by Mondraker, combined with an ideal wheel size and width such as 27’5 x 2,8” on the e-Prime, 27´5 x 3.0” on the e-Vantage and e-Crafty models and 26 x 4.8” on the e-Panzer. All of them are also powered by Performance CX Bosch drive unit specifically designed for mountain bikes. The combination of this drive unit and the 27´5+ wheel size and Forward Geometry offer a unique riding experience.  

Is the drive unit help or assistance adjustable?

You can easily adjust the pedalling assistance through the display located on the handlebars: Eco, with a 50% boost assistance added plus our leg power when pedalling, Tour, with 120%; Sport, with 210% and Turbo, up to 300% boost, a really powerful assistance level that will help us climb impossible climbs and ride faster with less physical effort. 

How long does the battery last?

Battery duration is highly subjective, as it depends on the type of terrain we are pedalling on, the ups and downs, the rider’s weight and, above all, the assistance level we have chosen. On Eco mode we can ride several hours before the battery drains completely, but on Turbo mode, overusing the assistance and riding uphill all the time can ruin battery life sooner than we think. Having said this, average range may be 3 or 4 hours with a logical use of our e-MTB, riding from 50 to 120 km depending on conditions. The 500 Wh battery is 80% recharged in 2 hrs. and 30 minutes, reaching 100% of charge in 3 hrs. and 30 minutes. Five LEDs on the handlebar display show how much battery life is left. From 100% full range, every LED means 20% of battery duration.

How do pedal-assisted electric bikes work?

The concept of an e-MTB holds no mystery. These bikes have a specific frame, exclusive to each model with the electric engine in the bottom, and the battery on the main tube, which is its power supply. Mondraker e-MTBs have 10 or 11 speeds depending on the model, and the only difference compared to a non-electric mountain bike in the constant assistance provided by its drive unit as we pedal. Within the electric bike industry, our e-MTBs are commonly referred to as “pedelecs” with pedal assistance from low revs up to 25 km/h, when the engine stops its assistance. Based on these features, pedelecs are considered bikes and do not require any insurance, nor need to be registered on the Traffic department, or use a licence plate or lights to ride on urban roads. These are legal requirements for those bikes with higher assistance, referred to as “speed pedelecs”, which can reach speeds up to 45 km/h. 

Can I make changes to the bike, such as transmission and tyres, or can I replace the wheels and install 29er wheels, for example?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc, are introduced into each bike’s setting program for proper performance. And any modification or system update  must be carried out by an official Mondraker dealer featuting Bosch’s certificate and diagnostic kit. Having said this yes, it is possible to replace the tyres with similar ones, of the same diameter, but replacing the main single ring or rear cogset requires modifying the standard programming settings. In this case, you must visit your official Mondraker dealer to manage these changes. 

Are e-MTBs only for less experienced people or those unwilling to try hard on the bike?

Unfortunately, there are many urban legends and criticisms by a large public segment that does not understand this kind of bikes or see them as a threat to the other “motorless” mountain bikes. But every negative opinion and criticism towards e-MTBs become praises and positive feedbacks when you try them out and discover a new world of possibilities and riding joy with all they have to offer. Riding an e-MTB is hardly any different from a traditional MTB, although they are heavier and have greater momentum when cornering and going downhill. Pedalling assistance means a total advantage that increases the fun factor, enabling you to go faster with less effort... but still pedalling hard and doing physical exercise. This means that we will have to pedal almost the same, but thanks to the different assistance modes that we can select on the handlebar display, we can decide it will be harder or easier. But if we want, we can push as hard as with a non electric MTB. The main advantage is that we go faster. This kind of bikes opens up a new dimension for those riders who are not in a good shape, as they may benefit from greater assistance and climb faster as opposed to those who are in a better physical shape; but more expert riders will also be the ones who will really appreciate and take the most advantage and get the most potential provided by this type of e-MTBs.

Thundra

WHICH TYPE OF MAINTENANCE OR SAFETY CHECKS DO MOTORS REQUIRE?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE THUNDRA?

2020 THUNDRA

S

M

L

XL

FOX TRANSFER

100MM

120,5

160,5

195,5

195,5

125MM

120,5

160,5

210,5

220,5

150MM

120,5

160,5

210,5

245,5

RS REVERB

100MM

125

165

175

175

125MM

125

165

200

200

150MM

125

165

215

225

170MM

125

165

215

245

RS REVERB CJ

100MM

105

145

195

200

125MM

105

145

195

200

150MM

105

145

195

225

170MM

105

145

195

225

ONOFF PIJA

100MM

125

165

175

175

125MM

125

165

200

200

150MM

120,5

160,5

210,5

220,5

170MM

120,5

160,5

210,5

245,5

IS THUNDRA COMPATIBLE WITH PLUS WHEELS?

Thundra is compatible with 29” and 27’5 x 2,80” Plus tires knowing that switching to Plus tires coming from stock 29”, bottom bracket height might drop significantly depending on the tire size.

IS IT POSSIBLE TO REMOVE THE BATTERY FROM THE THUNDRA?

The internal battery on the bike can only be removed disassembling the motor, so it is not easily removable. To charge the battery you need to plug the charger directly connected to the bike on the bottom of the main tube.

IS IT Di2 COMPATIBLE?

Thundra is Di2 compatible. First thing you have to do is installing a software update so the Di2 system can use the energy from the motor’ battery. As the chainstay lacks of internal guiding you have to be very careful to protect the rear derailleur cable. Di2 system on e-bikes makes greater and faster wear on chain and cassette due to the motor power assistance, and at Mondraker we assume no liability for any thereby resulting damage or faster components’ wear.

CAN I MAKE CHANGES TO THE BIKE SUCH AS GEARING OR TIRES FOR INSTANCE?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc., are introduced into each bike’s setting program for proper performance. Any modification or system firmware update must be carried out by an official Mondraker dealer.

SuperFoxy

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH SHOCKS ARE COMPATIBLE WITH SUPERFOXY CARBON 29?

In addition to the ones we use for the different builds, it is also compatible with Öhlins STX Air, RockShox Super Deluxe Air or FOX DPX2. It is not compatible with 2021 new generation FOX DHX2 or FOX Float X2 models, RockShox SuperDeluxe Coil or Öhlins TTX22 coil. SuperFoxy Carbon feature metric sized shocks with Trunnion upper mount and bottom 22.2x10 mm standard hardware. 

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE SUPERFOXY CARBON?

2020 SUPERFOXY CARBON

S

M

L

XL

FOX TRANSFER

100MM

164,5

195,5

195,5

195,5

125MM

164,5

204,5

204,5

220,5

150MM

164,5

204,5

204,5

245,5

RS REVERB

100MM

160

175

175

175

125MM

160

200

200

200

150MM

160

200

200

225

170MM

160

200

200

245

RS REVERB CJ

100MM

138

175

175

175

125MM

138

178

200

200

150MM

138

178

225

225

170MM

138

178

225

245

ONOFF PIJA

100MM

160

175

175

175

125MM

160

200

200

200

150MM

164,5

204,5

204,5

220,5

170MM

164,5

204,5

204,5

245,5

WHAT DOES THE GEOMETRY KIT INCLUDE?

Geometry kit comes standard only with the SuperFoxy Carbon RR model and also with the SuperFoxy Carbon RR frameset kit, and contains the following parts:

  1. Adjustable headset cups to adjust the head angle back to 0º from the -1° set as standard.
  2. Set of rear dropouts to adjust chainstay length by +10 mm.

Summum

WHICH SIZE SHOULD I BUY?
Sizes differ from one rider to other. Personal prefferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline.
  • S 1.58  -  1.68
  • M 1.67  -  1.76
  • L 1.75  -  1.86
  • XL 1.85  -  1.95
WHICH SHOCKS ARE COMPATIBLE WITH SUMMUM?

Summum has been designed to fit most shocks on the market with the following specifications:

  • Metric sized 225x70mm
  • Trunnion upper mount 
  • Bottom 30x8mm hardware

WHAT MAINTENANCE SHOULD I DO TO MY SUMMUM?

Downhill bikes suffer more intensive use than the rest of the disciplines, so a good maintenance is key to extend the life of our bike and guarantee a safe use. The main points to check are:

  • Before every ride: tire pressure, suspension pressure and/or adjustment and proper performance of the brakes. It is also important to check the bolts to avoid any play or cracking. 
  • After each ride: Cleaning and lubrication of the bike.
  • Every 4 or 5 rides: Check the brake pads for wear. Check the spokes tension. Clean the drivetrain and lube it. Check the wear and tear of the cables and housings. Check tire wear. Check headset or bottom bracket play. Change tubeless fluid. Check the tightening torque of the suspension links. 
  • Every 12-15 rides or once a year: Major suspension overhaul. Brake fluid change and bleeding. Grease the freehub, bottom bracket, headset, seat post and frame thru axles.


WHAT DOES THE GEOMETRY KIT OFFER?

The geometry kit comes standard on the Summum RR bike and Summum RR frameset only and consists of two sets of headset cups to adjust the fork angle by -1°, -2°, +1° or +2° with respect to the standard one (0º) on the complete RR 29" bike version as well as on the RR 27.5" and RR 29" frameset. 


CAN I CHANGE MY SUMMUM WHEEL DIAMETER?
Summum 27.5 and Summum 29 frames are different and have been optimised independently for each wheel diameter. 
It would be possible to ride a 29" front wheel on Summum 27.5 taking into account that we would need a specific 29" fork, and that geometry and set-up values of the bike will change significantly. Therefore, we do not recommend varying the diameter of the wheels on the Summum. 

Soporte

What must I consider to manage the incident correctly?

Photo of the whole bicycle

b. Photo detailing the particular incident

c. Photo of the chassis serial number

d. Official invoice

e. Weblog of bicycles from the 2010 season to date

This is the documentation which the store must present to our after-sales department.

I have an incident. What should I do?

Basically, it is the store where you bought your Mondraker, your contact person in these cases. He will manage your incident and will contact us to find out how to proceed.  The store is responsible for co-ordinating to resolve the incident.

Podium

Which size should I buy?

Sizing is different from one user to another. Personal likings are very different and the type of use of the bike is also very important for this decision. This is a general chart that could be used as a sizing guide:

1.58 – 1.68 S
1.67 – 1.76 M
1.75 – 1.86 L
1.85 – 1.95 XL

Which is the maximum tire size I can use in the Podium?

With an internal width rim size up to 25mm –currently Podium models are specced with 22 or 23 mm internal width rims- maximum tire size you can use is 29x2.4”which guarantees enough clearance to shed the mud easily

Is it possible to use non-Boost type crankset in the Podium?

There are some cases that you can use non-Boost type cranks, for instance, some Race Face models have a chainline in between the standard 142 mm and Boost 148 mm rear hub spacing, so they will be perfectly compatible with the Podium. It’s important to notice the chairing size. The bigger the size, the wider the chainline needed. 

Is it possible to adjust the Podium stem height?

Podium stem itself acts as the top headset cap. You could use spacers to rise the stem height, but you would have to use the top bearing cap too. It is important to note that if you are already using a fork with a cut down steerer tube, it will not be possible to rise the stem, as there will not be enough space for the stem to be properly clamped to the fork’s steerer tube. 

Can I use a standard stem in the Podium?

There is no mechanical obstacle on using standard stems, but at Mondraker we will not be responsible if the frame is damaged in the case of a crash, as IST-EVO is exclusively designed for the Podium stem. 

Plus

Why 27´5+ wheels?

“Plus” wheels provide greater riding comfort, superior traction and cornering grip with minimum extra weight, which leads to more enjoyment and establish a new dimension in mountain biking. 

Who is the potential rider of 27´5+ bikes?

According to the features described above of better cornering grip and greater traction, you already can already imagine the higher control and security level that this new wheel size offers. Such safety is the perfect claim for less technical or less experienced riders to be able to tackle new challenges never imagined before. The most technical riders can also enjoy new thrills such as climbing very steep trails or railing turns with total confidence: examples of what the new Plus world has to offer.  

Which models carry the new 27´5+ wheels?

At Mondraker we differ models in Trail category from the ones in All Mountain category. This way we find Prime + and Factor + 120 mm travel models with 2.8” tires and Vantage + and Crafty + 140 mm travel with 3.0” tires. 

What is the point of these bikes with this type of wheel?

As soon as you experience how easy these bikes roll, the extra uphill traction, the greater overall comfort and better cornering grip you will discover a whole new world of fun. With Plus wheels you will roll over obstacles with less effort in a more natural way, you will ride along winding terrain with added safety and control, and because of the bigger tire volume you will have lower risk of having a puncture. Many added advantages concerning its larger sizes of 2.8” or 3.0” that, as soon as you experience it, will lead you to discover the infinite fun possibilities that Plus wheels offer. 

Level

WHICH TYPE OF MAINTENANCE OR SAFETY CHECKS DO MOTORS REQUIRE?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH SHOCKS ARE COMPATIBLE WITH 2020 LEVEL?

In addition to the RockShox Super Deluxe Coil as standard on both models, Leve lis also compatible with Fox DPS, DPX2, Float X2, DHX2 and similar options such as Öhlins TTX Air, TTX22 and STX Air. Level feature metric sized 225 x 75 mm shocks with Trunnion upper mount while using 25 x 10 mm bottom standard hardware

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE LEVEL?

2020 LEVEL

S

M

L

XL

FOX TRANSFER

100MM

120,5

160,5

195,5

195,5

125MM

120,5

160,5

210,5

220,5

150MM

120,5

160,5

210,5

245,5

RS REVERB

100MM

125

165

175

175

125MM

125

165

200

200

150MM

125

165

215

225

170MM

125

165

215

245

RS REVERB CJ

100MM

105

145

195

200

125MM

105

145

195

200

150MM

105

145

195

225

170MM

105

145

195

225

ONOFF PIJA

100MM

125

165

175

175

125MM

125

165

200

200

150MM

120,5

160,5

210,5

220,5

170MM

120,5

160,5

210,5

245,5

IS IT Di2 COMPATIBLE?

Level is Di2 compatible. First thing you have to do is installing a software update so the Di2 system can use the energy from the motor’ battery. As the chainstay lacks of internal guiding you have to be very careful to protect the rear derailleur cable. Di2 system on e-bikes makes greater and faster wear on chain and cassette due to the motor power assistance, and at Mondraker we assume no liability for any thereby resulting damage or faster components’ wear.

CAN I MAKE CHANGES TO THE BIKE SUCH AS GEARING OR TIRES FOR INSTANCE?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc., are introduced into each bike’s setting program for proper performance. Any modification or system firmware update must be carried out by an official Mondraker dealer.

Foxy carbon 275

WHAT SIZE SHOULD I BUY?

The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHAT MAXIMUM TYRE SIZE CAN BEINSTALLED IN FOXY CARBON?

Foxy Carbon 27.5 is compatible with rear tyres up to 66mm wide, which would match with 27,5x2.6” tyres, but even so it is advisable to measure the tyre before installing it as the actual measure may vary depending on the manufacturer.

WHAT DOES THE GEOMETRY KIT CONSIST OF?

The geometry kit is included in Foxy Carbon XR and in Foxy Carbon XR individual frames, and it includes:

1. Steering cups set which include new bearings to adjust the fork angle to +/-1º

2. Set of rear derailleur hangers which enable to change the chainstay length to +/-10mm.

The geometry kits are different depending on the size and it is determined by the head tube. Therefore, each geometry kit is exclusive for each size.

IS IT COMPATIBLE WITH DI2?

The new Foxy has not inner cable routing to host the DI2 shift cables, so if it is installed you have to be careful with the protection of the shift cable, especially below the bottom bracket cage.

Foxy Carbon 29

WHICH SHOCKS ARE COMPATIBLE WITH FOXY CARBON 29?

In addition to the ones we use for the different models, it is also compatible with Fox Float X2, DHX2, RockShox SuperDeluxe Air or Coil as well as Öhlins TTX Air, TTX22 and STX Air. Foxy Carbon feature metric 205 x 62,5 mm sized shocks with Trunnion upper mount and bottom 22.2x10 mm standard hardware.

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE FOXY CARBON 29?

FOXY CARBON 2020

TALLA S

TALLA M

TALLA L

TALLA XL

FOX TRANSFER

100MM

164,5

195,5

195,5

195,5

125MM

164,5

204,5

204,5

220,5

150MM

164,5

204,5

204,5

245,5

RS REVERB

100MM

160

175

175

175

125MM

160

200

200

200

150MM

160

200

200

225

170MM

160

200

200

245

RS REVERB CJ

100MM

138

175

175

175

125MM

138

178

200

200

150MM

138

178

225

225

170MM

138

178

225

245

ONOFF PIJA

100MM

160

175

175

175

125MM

160

200

200

200

150MM

164,5

204,5

204,5

220,5

170MM

164,5

204,5

204,5

245,5

WHAT SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHAT DOES THE GEOMETRY KIT INCLUDE?

Geometry kit comes standard only with the Foxy Carbon RR SL model and also with the Foxy Carbon RR SL frameset kit, and contains adjustable headset cups to adjust the head angle +/-1°.

Geometry kits are different according to each size related to the different headtube height. So, every geometry kit is exclusive for every size.

Foxy 29

WHICH SHOCKS ARE COMPATIBLE WITH FOXY ALLOY 29?

In addition to the ones we use for the different models, it is also compatible with Fox Float X2, DHX2, RockShox SuperDeluxe Air or Coil. Foxy Alloy feature metric sized 205 x 62,5 mm shocks with Trunnion upper mount and bottom 22.2x10 mm standard hardware.

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE FOXY ALLOY 29?

2020 FOXY ALLOY

S

M

L

XL

FOX TRANSFER

100MM

164,5

195,5

195,5

195,5

125MM

164,5

204,5

204,5

220,5

150MM

164,5

204,5

204,5

245,5

RS REVERB

100MM

160

175

175

175

125MM

160

200

200

200

150MM

160

200

200

225

170MM

160

200

200

245

RS REVERB CJ

100MM

138

175

175

175

125MM

138

178

200

200

150MM

138

178

225

225

170MM

138

178

225

245

ONOFF PIJA

100MM

160

175

175

175

125MM

160

200

200

200

150MM

164,5

204,5

204,5

220,5

170MM

164,5

204,5

204,5

245,5

WHAT SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

Foxy 275

F-Podium

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal prefferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline.

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

Dusk

WHICH TYPE OF MAINTENANCE OR SAFETY CHECKS DO MOTORS REQUIRE?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH SHOCKS ARE COMPATIBLE WITH 2020 DUSK?

Dusk is compatible with all coil sprung, air inline or piggyback shocks such as Fox DPS, DPX2, RockShox Deluxe, Super Deluxe Air or Coil as well as Float X2 o DHX2 or Öhlins TTX Air, TTX22 and STX Air. Dusk feature metric sized 205 x 65 mm shocks with Trunnion upper mount while using 25 x 10 mm bottom standard hardware. Incase you ride with the secondary external battery installed, it is not possible to run a piggyback shock, that’s why the standard inline choices.

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE DUSK?

2020 DUSK

S

M

L

XL

FOX TRANSFER

100MM

120,5

160,5

195,5

195,5

125MM

120,5

160,5

210,5

220,5

150MM

120,5

160,5

210,5

245,5

RS REVERB

100MM

125

165

175

175

125MM

125

165

200

200

150MM

125

165

215

225

170MM

125

165

215

245

RS REVERB CJ

100MM

105

145

195

200

125MM

105

145

195

200

150MM

105

145

195

225

170MM

105

145

195

225

ONOFF PIJA

100MM

125

165

175

175

125MM

125

165

200

200

150MM

120,5

160,5

210,5

220,5

170MM

120,5

160,5

210,5

245,5

IS IT POSSIBLE TO REMOVE THE BATTERY FROM THE DUSK?

The internal battery on the bike can only be removed disassembling the motor, so it is not easily removable. To charge the battery you need to plug the charger directly connected to the bike on the bottom of the main tube.

IS IT Di2 COMPATIBLE?

Dusk is Di2 compatible. First thing you have to do is installing a software update so the Di2 system can use the energy from the motor’ battery. As the chainstay lacks of internal guiding you have to be very careful to protect the rear derailleur cable. Di2 system on e-bikes makes greater and faster wear on chain and cassette due to the motor power assistance, and at Mondraker we assume no liability for any thereby resulting damage or faster components’ wear.

CAN I MAKE CHANGES TO THE BIKE SUCH AS GEARING OR TIRES FOR INSTANCE?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc., are introduced into each bike’s setting program for proper performance. Any modification or system firmware update must be carried out by an official Mondraker dealer.

Dune Carbon

WHICH SHOCKS ARE COMPATIBLE WITH DUNE CARBON?

Besides the RockShox SuperDeluxe Coil OE on 2020 Dune Carbon XR, it is also compatible with air or coil FOX Float X2 and DHX2 shocks and also Öhlins TTX Air, TTX22 y STX Air models. It is not compatible with RockShox Vivid Air or Cane Creek Double Barrel Air / Coil.

WHAT TELESCOPIC SEATPOST LENGTH CAN BE USED IN MY DUNE CARBON?

Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length.  This chart shows the length of the dropper post that, as maximum, can be lowered with RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

2020 DUNE CARBON

S

M

L

XL

FOX TRANSFER

100MM

164,5

195,5

195,5

195,5

125MM

164,5

204,5

204,5

220,5

150MM

164,5

204,5

204,5

245,5

RS REVERB

100MM

160

175

175

175

125MM

160

200

200

200

150MM

160

200

200

225

170MM

160

200

200

245

RS REVERB CJ

100MM

138

175

175

175

125MM

138

178

200

200

150MM

138

178

225

225

170MM

138

178

225

245

ONOFF PIJA

100MM

160

175

175

175

125MM

160

200

200

200

150MM

164,5

204,5

204,5

220,5

170MM

164,5

204,5

204,5

245,5

WHAT SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHAT DOES THE GEOMETRY KIT INCLUDE?

Geometry kit comes standard with Dune Carbon XR and also with the Dune Carbon XR frameset kit, and contains the following parts:

  1. Adjustable headset cups and bearings to adjust the head angle +/-1º
  2. Set of rear dropouts to adjust chainstay length by +10 mm. Including the different derailleur hanger.
  3. Set of different rear brake caliper mounting +/-10 mm.

Geometry kits are different according to each size related to the different headtube height. So, every geometry kit is exclusive for every size.

Dune Carbon steering cups are also compatible with Foxy Carbon.

With -1º cups installed, wheelbase increases by 5 mm and bottom bracket drops 2 mm. Effective seat angle slackens 0.2º and top tube effective distance is reduced in 5 mm.

                                                                                             

Dune

WHAT TYRE SIZE CAN I INSTALL?

With a rim inner width of up to 30mm –currently the Dune models are assembled with rims of 27 or 30mm inner width- the biggest tyre that can be set is 27.5x2.5”, which guarantees enough space to clear the mud.

WHAT TELESCOPIC SEATPOST LENGTH CAN BE USED IN MY DUNE?

Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length.  This chart shows the length of the dropper post that, as maximum, can be lowered with RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

WHAT SIZE SHOULD I BUY?

Sizing is different from one user to another. Personal likings are very different and the type of use of the bike is also very important for this decision. This is a general chart that could be used as a sizing guide:

  • 1.58 – 1.68 S
  • 1.67 – 1.76 M
  • 1.75 – 1.86 L
  • 1.85 – 1.95 XL
WHAT FORK TRAVEL CAN I INSTALL?

You can use forks up to 180 mm travel. Compared to a 170 mm fork, head angle would be 0,5º slacker and BB height would rise around 5 mm.

CAN I CHANGE THE HEAD ANGLE?

There is a geometry kit available for the Dune, which includes two headset cups to slacken the head angle 1º.

Crusher

WHAT SHOCKS ARE COMPATIBLE WITH CRUSHER?

Crusher is compatible with all kinds of shocks, with or without deposit, Fox DPS, DPX2, RockShox Deluxe, Super Deluxe. It is not compatible with higher volume air shocks like Fox Float X2 or RockShox Vivid Air, and spring shocks are not compatible either. Crushers is assembled with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10mm bottom bushing is used.

WHAT KIND OF MAINTENANCE OR REVISIONS DO THE MOTORS REQUIRE?

Absolutely none. It is not necessary either to oil any of the parts in the motor, or disassemble it, you only have to take the same care as with a traditional mountain bike. But we do have to mention a preventive measure applicable to any current mountain bike: the electric parts and concretely the motor central movement cannot be cleaned with any kind of machinery with pressure washing, so it is not possible to use high pressure washing directly as it may harm the electric parts in the motor.

IS IT COMPATIBLE WITH DI2?

Crusher is compatible with DI2 shifts. First, it is necessary to upgrade the motor software to enable the Di2 system to work. The DI2 system installed in e-bikes provokes a higher chain and cassette wear due to the power of the motor. Mondraker does not take responsibility for this premature wear.

IS IT COMPATIBLE WITH 29” WHEELS?

Crusher is compatible with 29” wheels, but it depends on the tyre that we use as it can compromise the space between it and the seat stay, especially with mud. It is important to know that the motor is programmed for the preinstalled wheel diameter, so using a different wheel diameter would change the motor performance and the information shown on the display.

CAN I MAKE CHANGES IN THE BIKE SUCH AS TRANSMISION OR TYRES?

The bicycles are assembled manually in our Mondraker buildings and the technical measures for each bicycle and its programming is also made by us is order to ensure its perfect performance as well as its corresponding standardization. The tyre size, the amount of speeds and teeth of the cogs, etc. is information that is registered in the setting programme of each bike so that it works perfectly and every modification or system upgrade has to be carried out in a Mondraker point of sale.

Crafty

WHICH TYPE OF MAINTENANCE OR SAFETY CHECKS DO MOTORS REQUIRE?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH SHOCKS ARE COMPATIBLE WITH 2020 CRAFTY?

Crafty is compatible with all coil sprung, air inline or piggyback shocks such as Fox DPS, DPX2, RockShox Deluxe, Super Deluxe Air or Coil as well as Float X2 o DHX2 or Öhlins TTX Air, TTX22 and STX Air. Crafty feature metric sized 205 x 65 mm shocks with Trunnion upper mount while using 25 x 10 mm bottom standard hardware

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE CRAFTY?

2020 CRAFTY

S

M

L

XL

FOX TRANSFER

100MM

120,5

160,5

195,5

195,5

125MM

120,5

160,5

210,5

220,5

150MM

120,5

160,5

210,5

245,5

RS REVERB

100MM

125

165

175

175

125MM

125

165

200

200

150MM

125

165

215

225

170MM

125

165

215

245

RS REVERB CJ

100MM

105

145

195

200

125MM

105

145

195

200

150MM

105

145

195

225

170MM

105

145

195

225

ONOFF PIJA

100MM

125

165

175

175

125MM

125

165

200

200

150MM

120,5

160,5

210,5

220,5

170MM

120,5

160,5

210,5

245,5

IS IT Di2 COMPATIBLE?

Crafty is Di2 compatible. First thing you have to do is installing a software update so the Di2 system can use the energy from the motor’ battery. As the chainstay lacks of internal guiding you have to be very careful to protect the rear derailleur cable. Di2 system on e-bikes makes greater and faster wear on chain and cassette due to the motor power assistance, and at Mondraker we assume no liability for any thereby resulting damage or faster components’ wear.

CAN I MAKE CHANGES TO THE BIKE SUCH AS GEARING OR TIRES FOR INSTANCE?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc., are introduced into each bike’s setting program for proper performance. Any modification or system firmware update must be carried out by an official Mondraker dealer.

Chaser

WHICH TYPE OF MAINTENANCE OR SAFETY CHECKS DO MOTORS REQUIRE?

Absolutely none. Nor is it required to lubricate any parts in the drive unit nor disassemble it... all you have to do is taking care for it as a traditional mountain bike. It is important to mention, however, as a precaution applicable to any mountain bike: electronic parts and, specifically, the bottom bracket area of the drive unit should never be cleaned with any high-pressure washer machine. Therefore, it is not possible to use high-pressure water to clean the cranks axle directly as the electronic parts of the drive unit can be seriously damaged.

WHICH SIZE SHOULD I BUY?

Sizes differ from one rider to other. Personal preferences are very unique and how you ride your bike is also important when choosing the correct size. This is a standard size chart you can use as a guideline:

S 1.58  -  1.68
M 1.67  -  1.76
L 1.75  -  1.86
XL 1.85  -  1.95

WHICH SHOCKS ARE COMPATIBLE WITH 2020 CHASER?

Chaser is compatible with all air inline or piggyback shocks such as Fox DPS, DPX2, RockShox Deluxe, Super Deluxe Air or Coil as well as Float X2 o DHX2 or Öhlins TTX Air, TTX22 and STX Air. Chaser feature metric sized 205 x 65 mm shocks with Trunnion upper mount while using 25 x 10 mm bottom standard hardware

WHICH MAXIMUM DROPPER POST LENGTH CAN I USE ON THE CHASER?

2020 CHASER

S

M

L

XL

FOX TRANSFER

100MM

120,5

160,5

195,5

195,5

125MM

120,5

160,5

210,5

220,5

150MM

120,5

160,5

210,5

245,5

RS REVERB

100MM

125

165

175

175

125MM

125

165

200

200

150MM

125

165

215

225

170MM

125

165

215

245

RS REVERB CJ

100MM

105

145

195

200

125MM

105

145

195

200

150MM

105

145

195

225

170MM

105

145

195

225

ONOFF PIJA

100MM

125

165

175

175

125MM

125

165

200

200

150MM

120,5

160,5

210,5

220,5

170MM

120,5

160,5

210,5

245,5

IS IT Di2 COMPATIBLE?

Chaser is Di2 compatible. First thing you have to do is installing a software update so the Di2 system can use the energy from the motor’ battery. As the chainstay lacks of internal guiding you have to be very careful to protect the rear derailleur cable. Di2 system on e-bikes makes greater and faster wear on chain and cassette due to the motor power assistance, and at Mondraker we assume no liability for any thereby resulting damage or faster components’ wear.

IS CHASER COMPATIBLE WITH PLUS OR 29” WHEELS?

Both Chaser models are either compatible with 29 x 2.6” and 27’5 x 2.80” Plus but it is important to note that switching from 29” wheels to 27’5 x 2,80” Plus tires BB height might drop significantly depending on the tire size and vice versa.

CAN I MAKE CHANGES TO THE BIKE SUCH AS GEARING OR TIRES FOR INSTANCE?

Bikes are hand-assembled at our Mondraker facilities and each bike’s technical parameters and programming are also set by us to ensure its perfect performance and all relevant homologation. Wheel size and tire size, number of speeds and its different sprocket numbers etc., are introduced into each bike’s setting program for proper performance. Any modification or system firmware update must be carried out by an official Mondraker dealer.