With the SAG setting you can customise the suspension settings of both the the front and rear springs if the bike has both. The adjustment is based on the bike model, your own weight and your riding style. This functionality is available for bikes with MIND.
To adjust the SAG, go to Bikes, select the bike you want to set up, connect your bike via bluetooth and click on the "Set SAG" button.
You will then see the steps you have to follow: you will be asked to input your weight and choose between three driving modes: Comfort, Standard or Racing and, depending on the data you input, the system will tell you which pressure to apply and the settings for the other parameters. To increase or reduce pressure as indicated, use a shock pump.
Once the changes have been made, it will tell you to get on the bike. Try to do this with the equipment you use often: helmet, shoes, rucksack, ... so that the set weight is accurate. Climb on the bike and let your weight drop softly on the saddle and pedals.
Once on the bike, click on Check. If the setting is correct, you will see the "Correct Setting" message. In the event that the parameters are not correct, an error message will tell you if you need to increase pressure or remove pressure from your rear shock or your front shock.
When you check these settings, the LED lights on the bike's device will light up:
-green lights: indicate a correct setting.
-red lights: indicate pressure is too high, you need to reduce air pressure.
-blue lights: indicate pressure is too low, you need to increase air pressure.
Once the changes have been made to the corresponding shock absorbers, perform the verification process over.
If you have already set up the SAG before, you will see the "Check SAG" button. To check the settings, press the button, get on the bike and hit "Check setting". You will also be shown the "Correct setting" message or the pressure amounts to be changed.